资料介绍
Table of Contents
Mbed: User Guide for SDP-K1
Introduction
The SDP-K1 (EVAL-SDP-CK1Z board) is one of Analog Devices' Mbed enabled boards. Based on an STM32F469NI microcontroller, it allows users to easily develop drivers and example code for Analog Devices products and evaluation boards. The CMSIS-DAP hardware circuit and DAPLink firmware in the Freescale processor, allows SDP-K1 board to be easily programmed and debugged. The board has an Arduino header and 120-pin SDP connector making it compatible with many Analog Devices evaluation boards.
Mbed is used by Analog Devices to develop and distribute drivers for Analog ICs. Mbed is an online IDE developed by ARM. It is open-source and supports controller boards with Cortex ARM core processors. These controller boards are developed by various companies including Analog Devices, ST Microcontroller, NXP, Renesas etc. Mbed allows for development using:
- Desktop IDE (recommended): https://os.mbed.com/studio/
- Command line tool: https://os.mbed.com/docs/mbed-os/v6.6/quick-start/build-with-mbed-cli.html.
The platform is available at no cost for customers and is easy to use. A major advantage to Mbed is that the example programs can be run on other Mbed enabled boards that customers are familiar with as long as it meets the hardware setup requirements. This allows for the evaluation of parts regardless of the controller board available.
SDP-K1 Board Features
- Arduino Uno headers
- 120-pin SDP connector
- High performance ARM® Cortex™-M4 Core (STM32F469NI)
- 180 MHz max CPU frequency, 384 KB SRAM, 2048 KB Flash
- 1.8V or 3.3V selectable IO voltage
- 480Mbps High-Speed USB 2.0 with USB-C connector (Device)
- 45MHz SPI at 3.3V & 22.5MHz at 1.8V
- 400KHz I2C
- Timers / PWM
- 12-bit ADC
- GPIO
- 16MB SDRAM
- 3 traffic light LEDS (green, orange, red)
- 1 status LED
Board Components
Quick Start Guide
Each product with Mbed support comes with:
- Library files or drivers for the product and,
- A top level example program that provides a text based menu driven interface that demonstrates the library functions.
All the code files will be shared on the code tab of Analog Devices Mbed web page https://os.mbed.com/teams/AnalogDevices/code/. Each project comes with a README.txt that explains how to use the code. This document is a user guide on how to use the code to evaluate products supported with Mbed code. It explains in more detail, the Mbed setup instructions written in the README.txt. The hardware setup instructions depends on the product and evaluation board used and will be explained in the README.txt.
Mbed Setup
- Go to Mbed web page https://www.mbed.com and click Log in/sign Up button on top right. Create an Mbed account or log in. Please note the username you are using. Open the online compiler by clicking the yellow button on the top right. This is what the compiler will look like:
- Add SDP-K1 board to your compiler by going to https://os.mbed.com/platforms/SDP_K1/ and click on Add to your Mbed Compiler button on the bottom right.
Running Code on Mbed
- Click Compile. This should download a binary file, «program_name».SDP_K1.bin. Find the file in your Downloads folder.
- To program the SDP-K1 board, connect the SDP-K1 board to your computer using the USB cable provided. You should see the board as a new drive on your computer. Copy the binary file into the Mbed enabled board drive. You can also drag and drop the file, like a USB stick.
- Connect the evaluation board and follow the demo manual for the evaluation board to set up the board as required.
- To communicate with the board, use your favorite Terminal program, like Putty, Tera Term etc. To use Putty, download and install Putty from here. Here are some installation instructions. Open Putty and select Serial connection type. Enter the serial port number and baud rate. Click Open.
NOTE: You can find the serial port (which constantly changes, every time you plug a device in), by checking device manager.
Useful Links
For further information on Mbed, developing and running code, and the SDP-K1 controller board, consult the following:
Mbed documentation: https://os.mbed.com/docs/mbed-os/v6.5/introduction/index.html
SDP-K1 Mbed page (includes pinouts and more detailed description of using the SDP-K1 in Mbed): https://os.mbed.com/platforms/SDP_K1/
Mbed supported ADI parts: https://wiki.analog.com/resources/tools-software/mbed-list
Purchase SDP-K1: http://www.analog.com/SDP-K1
- MCGS 嵌入版用户指南 4次下载
- SDP-H1用户指南 9次下载
- Ei3 SDP转接板用户指南 5次下载
- UG-1539:EVAL-SDP-CK1Z用户指南 0次下载
- SDP-K1 BOM表 5次下载
- SDP-K1原理图 5次下载
- SDP-K1 BOM表 6次下载
- SDP-K1原理图 9次下载
- SDP-K1 BOM 5次下载
- SDP-K1 Schematic 0次下载
- SDP-K1 BOM 8次下载
- SDP-K1 Schematic 4次下载
- PSMC设计器用户指南及技巧 3次下载
- K-Flash在线编程软件用户使用指南 15次下载
- AstroII-EVB-F1K(A)-L144开发板用户指南 33次下载
- MAX77812用户可选相位配置指南及其选择方法 123次阅读
- UART串口端为何串联1k电阻 4743次阅读
- 可靠的长线1-Wire网络指南 406次阅读
- 使用LabView控制DS3900串程通信模块 503次阅读
- S32K3电机控制资源精华汇总 1641次阅读
- 使用含快速开关SiC器件的RC缓冲电路实用解决方案和指南 1556次阅读
- 基于APEX20K600EBC652-1X FPGA实现多径信道模拟器的设计 1548次阅读
- 基于MAXREFDES220的心率和 SpO2 血氧传感器的医疗监测电路设计 2865次阅读
- 微雪电子K9F1G08U0E NandFlash存储模块简介 4024次阅读
- 朗锐智科Nvidia K1安卓主板介绍 1838次阅读
- 索尼电视A1系列与4K液晶系列对比 5629次阅读
- TDP、TBP、SDP和ACP的区别 9631次阅读
- ARM公司低调升级Mbed_为物联网应用做准备 2404次阅读
- 系统演示平台便于快速进行原型制作与评估 1275次阅读
- mbed软件开发平台入门学习基础 1w次阅读
下载排行
本周
- 1电感式传感:线性位置传感(第 1 部分)
- 157.05KB | 6次下载 | 免费
- 2国民技术N32G4FR使用MMU进行多用户场景下的FLASH分区保护
- 1.42 MB | 6次下载 | 免费
- 3Arduino超外差接收器开源分享
- 0.14 MB | 4次下载 | 免费
- 4国民技术N32G43XCL-STB开发板资料
- 1.40 MB | 4次下载 | 免费
- 5在TI,数字成像芯片的制作过程与众不同
- 208.57KB | 3次下载 | 免费
- 6心形手表开源硬件
- 0.86 MB | 3次下载 | 免费
- 7电感式传感:线性位置传感(第 2 部分)
- 131.62KB | 3次下载 | 免费
- 8带按钮的Arduino控制伺服电机位置
- 0.00 MB | 3次下载 | 免费
本月
- 1电子元器件基础知识
- 8.05 MB | 159次下载 | 免费
- 2射频工程师必备的二十个经典模拟电路
- 0.28 MB | 53次下载 | 免费
- 3电动汽车车载充电机(OBC)与车载DC/DC转换器
- 8.20 MB | 48次下载 | 免费
- 4现代电源设计大全
- 7.23 MB | 44次下载 | 免费
- 5模拟电子技术基础
- 5.50 MB | 31次下载 | 1 积分
- 6Cadence OrCAD17.4使用教程
- 3.58 MB | 29次下载 | 1 积分
- 7人脸识别开源分享(原理图+PCB+源码)
- 1.88 MB | 26次下载 | 免费
- 8无线电的基础知识分享
- 0.10 MB | 24次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 934976次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537652次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 1331200 | 419948次下载 | 免费
- 4OrCAD10.5下载,OrCAD10.5中文版软件
- 817182 | 234185次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 232962次下载 | 免费
- 6数据采集系统基础知识视频
- 16.3 MB | 192989次下载 | 免费
- 7电路仿真软件multisim 10.0免费下载
- 340992 | 191039次下载 | 免费
- 8十天学会AVR单片机与C语言视频教程 下载
- 158M | 183167次下载 | 免费
评论
查看更多