资料介绍
IIoT应用机诊断
电子工业在制造业中的应用近年来取得了巨大的飞跃,主要归功于智能制造的举措,如德国政府主导的工业4。物联网带来的产业发展势头对制造业自动化也产生了重大影响。事实上,这句话的物联网产业,采用或IIoT,尊重为数据收集和分析的群众,任何智能工厂实现控制方面需要物联网高度相关的基本概念。在许多方面,IIoT一直被视为一个连接和控制方法更能够立即提供生产力和效益比其他基于物联网的项目。
工业自动化系统自2000年代早期就已经在工厂实施,在这个阶段许多专有的通信协议和网络拓扑被用来连接自动化设备。这导致制造商的互操作性的方式很少,并捆绑工厂的实施,以潜在的一个供应商。除此之外,以太网已经成为世界上的网络协议,虽然它的一些缺点,使其应用在工厂自动化项目有限公司。
The primary challenge with standard Ethernet is that the MAC layer is not able to support real-time low latency data transfers. Designed for the transfer of large amounts of information across an enterprise network, the protocol is not suitable for moving the relatively small amounts of information needed for industrial control. For example, controlling a valve requires very little information to make it turn and for a sensor to report its current open/closed status. The other aspect of this is that, with Ethernet, control of the network is down to the devices attached to it, thus making it hard to predict when something will transfer. This, for a time-critical manufacturing process, is a major concern.
Control of manufacturing robots, valves, actuators etc., must take place in a deterministic manner. Diagnostics of the automation equipment in operation also requires a very deterministic response within the control instruction process such that an operation can be immediately halted before any other instruction is executed. It should also be noted that the focus of diagnostics is not only on the operation of the controlled device, such as a motor, actuator or valve, but of the network and associated network hardware too. German manufacturer Beckhoff had seen the wide adoption potential for Ethernet and developed its own Fieldbus protocol in order to correct the low bandwidth and deterministic nature within the standard Ethernet. This became known as EtherCAT? (Ethernet for Control Automation Technology) and is now an open standard and has become adopted by many thousands of automation equipment suppliers.
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- IIOT边缘软件方案介绍Edge Xpert-广州虹科
- 虹科PCAN-MiniDiag FD手持式CAN总线诊断设备
- 虹科手持式CAN/CAN FD总线诊断设备
- EMS的诊断技巧与案例解析综述 34次下载
- EMI的诊断技巧与案例解析资源下载 37次下载
- 基于多通道时频信号的CNN智能故障诊断技术 27次下载
- 基于时频图像特征的往复压缩机故障诊断 7次下载
- 基于麻雀搜索算法优化SVM的故障诊断 16次下载
- 基于主成分分析和支持向量机的滚动轴承故障诊断 4次下载
- 血液诊断机用自动增益超低信号跨阻放大器 7次下载
- 基于Gabor小波变换和多核支持向量机的诊断方法 16次下载
- IIoT技术应用于室内农业灌溉监测资料下载 16次下载
- 单片机系统EMC测试诊断步骤资料下载 12次下载
- 翻车机液压系统故障诊断 0次下载
- 提升机的减速机齿轮故障诊断 10次下载
- FANUC-β伺服报警的故障诊断及处理 70次阅读
- 远程诊断技术在汽车OTA刷新应用的研究 174次阅读
- 如何查看模块的诊断信息 267次阅读
- 使用西门子PST初步诊断PROFINET 298次阅读
- 通过相应的诊断指令去实现对S7-1200 CPU和扩展模块的诊断操作 480次阅读
- PROFINET IO中的诊断机制分析 337次阅读
- 基于SOA新架构的汽车远程诊断系统方案的设计 265次阅读
- 如何在HMI中创建诊断视图 309次阅读
- 基于硬件安全增强功能的ADI处理器保护IIoT 278次阅读
- 如何搭建UDS诊断帧发送环境 905次阅读
- WorkVisual显示EtherCAT设备的诊断数据 1018次阅读
- 汽车ECU故障诊断仪的设计及应用方案分析 3350次阅读
- KUKA C4如何使用诊断监视器? 2319次阅读
- 物联网(IoT)和工业IoT(IIoT)的资料介绍IoT和IIoT有什么区别? 1.2w次阅读
- 基于可编程FPGA在系统级实现诊断 792次阅读
下载排行
本周
- 1常用PIC系列8位单片机芯片引脚符号功能
- 0.07 MB | 3次下载 | 免费
- 2高频功率放大器知识分享
- 4.88 MB | 2次下载 | 免费
- 3稳压器PCB板开源分享
- 41.52 MB | 2次下载 | 免费
- 451单片机交通灯
- 0.04 MB | 1次下载 | 免费
- 5Cadence17.4技巧个人总结
- 5.16 MB | 1次下载 | 2 积分
- 6使用Arduino Uno制作洗手计时器
- 0.17 MB | 1次下载 | 免费
- 7台达4856ac 4840改可调最新方案
- 12.85 MB | 1次下载 | 2 积分
- 8COVID-19额温枪开源分享
- 12.62 MB | 1次下载 | 免费
本月
- 1178个经典c语言源代码
- 0.08 MB | 50次下载 | 免费
- 2主板维修精华秘籍
- 0.05 MB | 15次下载 | 免费
- 3使用光敏电阻和LED灯的环境光传感器
- 0.63 MB | 14次下载 | 免费
- 4自动驾驶汽车开源分享
- 0.01 MB | 13次下载 | 免费
- 510KW的车载OBC电路图
- 1.31 MB | 11次下载 | 1 积分
- 6芯狼电子无线充电原理图
- 0.10 MB | 10次下载 | 免费
- 7国民技术N32G45XVL-STB开发版资料
- 1.41 MB | 9次下载 | 免费
- 8电感式传感:线性位置传感(第 1 部分)
- 157.05KB | 8次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 934979次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537665次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 419950次下载 | 免费
- 4OrCAD10.5下载,OrCAD10.5中文版软件
- 817182 | 234204次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 232969次下载 | 免费
- 6数据采集系统基础知识视频
- 16.3 MB | 192989次下载 | 免费
- 7电路仿真软件multisim 10.0免费下载
- 340992 | 191057次下载 | 免费
- 8十天学会AVR单片机与C语言视频教程 下载
- 158M | 183181次下载 | 免费
评论
查看更多