完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
我遇到了一些问题,我现在用的芯片命名cypress3014肿消,意识到设备(cypress3014)连接到主机(USB3.0)与USB3.0的表,当USB模式是USB3.0,没有问题。
但我想知道,当USB3.0表还是输入,不拔出表,可以装置(cypress3014)转变角色,USB2.0模式?,主机还是USB3.0模式,可以进行USB 2模式枚举(cypress3014)。 有人知道关于这个问题的一些解决方案。 以上来自于百度翻译 以下为原文 I met some issue,now I used chip named Cypress3014-BZX,The sense that device (Cypress3014) connect to host(USB3.0) with USB3.0 table,when the u*** mode is USB3.0,there is no problem. But I wanted to know,when the u***3.0 table still input,not pull out the table,could the device(cypress3014) change the role to USB2.0 mode?,host was still USB3.0 mode,which could proceed with enumeration in USB 2.0 mode(Cypress3014). Did someone know some solution about this issue. |
|
相关推荐
1个回答
|
|
你好,
如果使用FX3SDK可用的示例FW,它尝试以USB 3模式枚举,如果不能在USB 3中枚举,则它回落到USB 2模式。您可以通过在FW中稍作修改来禁用此功能。 感谢和问候 阿比纳夫 以上来自于百度翻译 以下为原文 Hi, If you use the example FW that are available with FX3 SDK, it tries to enumerate in USB 3.0 mode, if not able to enumerate in USB 3.0, then it falls back to USB 2.0 mode. You can disable this feature by making slight modifications in the FW. Thanks & Regards Abhinav |
|
|
|
只有小组成员才能发言,加入小组>>
707个成员聚集在这个小组
加入小组1773 浏览 1 评论
1545 浏览 1 评论
3272 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗?
1454 浏览 6 评论
1288 浏览 1 评论
PSOC6 CY8CPROTO-063-BLE,在freertos下flash模拟eeprom写入出错问题
1487浏览 1评论
2104浏览 0评论
108浏览 0评论
1779浏览 0评论
2186浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 粤ICP备14022951号 )
GMT+8, 2023-10-6 10:17 , Processed in 0.567075 second(s), Total 62, Slave 57 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:粤 B2-20160233 工商网监 湘ICP备2023018690号